FD – 53 Heating Ovens

Heating oven with mechanical convection

A BINDER FD series heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous temperature distribution, quick dynamics and powerful fan, this heating oven saves valuable time.

Advantages:

• Fast, even tempering
• Wide temperature range
• Quality "Made in Germany"

  Features	Customer benefits	Characteristics
  APT.line™	Quick drying Identical test conditions throughout the chamber interior Independent of specimen size and quantity	APT.line™ for maximum precision Uniform circulation even under full load Homogeneous temperature conditions throughout specimen material
  Temperature range	Broad range of applications Short warm up times	Standard up to 300 °C Large power reserves
  Inner chamber concept	Maximum occupational safety Easy loading and unloading of specimen material Easy cleaning	Inner chamber made of stainless steel Very tight door closure with 2-point door latch Low heat dissipation due to 60 mm insulation Rack with tilt protection No permanent fixtures
  Standard equipment	Reliable, easy handling	Comprehensive standards Microprocessor control Ergonomically positioned controller. PT 100 temperature sensor
  Quality	Reliable devices with long service lives Short delivery times Minimal maintenance and operating costs	Premium quality Highly automated Series production High-quality materials, state-of-the-art production technology High standard according to DIN 12880 (27-point measurement)
  Accessories and Services	Flexible solution in terms of size, type and equipment Optimal solution for numerous applications BINDER INDIVIDUAL for customer-specific solutions Worldwide BINDER Service	Comprehensive product portfolio Size 23 to 240 liters Additional product lines with humidity, light, CO2 or vacuum Voltage variants (UL) and certificates Various options: Door with viewing window, access ports, reinforced shelves, Data Logger Kits Worldwide service network

  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
  • Temperature range from 5 °C above ambient temperature to 300 °C
  • DS control with integrated timer 0 to 99,59 hrs
  • Digital temperature setting with an accuracy of one degree
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
  • Adjustable front ventilation flap slide and rear exhaust Ø 50 mm (1.97 inch)
  • Units up to 115 liters are stackable
  • 2 chrome-plated racks included
  • BINDER test confirmation

    	FD 53
    	Exterior dimensions
    	Housing
    	Width (mm)	635
    	Height (incl. feet/castors) (mm)	620
    	Depth (plus connections and fittings) (mm)	575
    	Depth (incl. connections and fittings) (mm)	690
    	Wall clearance, rear (mm)	100
    	Wall clearance, side (mm)	160
    	Exhaust duct (outer Ø mm)	52
    	Steam space volume (l)	77
    	Number of doors (ea.)	1
    	Interior dimensions
    	Width (mm)	400
    	Height (mm)	400
    	Depth (mm)	340
    	Interior volume (l)	53
    	Racks (number standard/max.)	2 / 5
    	Load per rack (kg)	15
    	Permitted total load (kg)	40
    	Weight (empty) (kg)	44
    	Temperature data
    	Temperature range approx. 5 °C above ambient temperature to (°C)	300
    	Temperature variation
    	at 70 °C (± K)	0,8
    	at 150 °C (± K)	2
    	at 300 °C (± K)	3,7
    	Temperature fluctuation at 70 °C (± K)	0,3
    	Heating up time 1)
    	to 70 °C (min.)	7
    	to 150 °C (min.)	24
    	to 300 °C (min.)	60
    	Recovery time after doors were open for 30 sec. 1)
    	at 70 °C (min.)	2
    	at 150 °C (min.)	5
    	at 300 °C (min.)	9
    	Ventilation data
    	Ventilation
    	at 70 °C (x/h)	59
    	at 150 °C (x/h)	64
    	at 300 °C (x/h)	53
    	Electrical data
    	IP protection class acc. to EN 60529	IP 20
    	Voltage (± 10%) 50/60 Hz (V)	230
    	Nominal power (kW)	1,2
    	Energy consumption
    	at 70 °C (W)	172
    	at 150 °C (W)	429
    	at 300 °C (W)	951

    1) To 98% of the set value
    All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.